Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

840Dsl port X130 setup for S7

Created by: Cntrl Eng at: 2/20/2012 3:51 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/20/2012 3:51 PM	Rate (0)
Cntrl Eng Posts: 30 Rating: (0)	Hello, How do I setup X130 to be able to use S7? I've set the IP address using the basesys.ini file on the CF card, and have attempted to browse for the device under S7 manager, but have been unsuccessful. I am, however, able to ping the address.
Cntrl Eng Posts: 30 Rating: (0)
Suggestion To thank Quote Answer

2/20/2012 4:09 PM	Rate (0)
mehar Posts: 91 Rating: (1)	Hello, use x127 port for communicating with 840D sl. this port got constant ip 192.168.215.1..... try this
mehar Posts: 91 Rating: (1)
Suggestion To thank Quote Answer

2/20/2012 4:19 PM	Rate (0)
Cntrl Eng Posts: 30 Rating: (0)	My intent is to be able to edit the PLC remotely for our customer. They will provide the IP address scheme. To my understanding X127 is static and can not be changed.
Cntrl Eng Posts: 30 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on