Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

847C Memory Upgrade

Created by: Java_user at: 5/27/2013 5:36 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

5/27/2013 5:36 PM	Rate (0)
Java_user Member Joined: 2/12/2013 Last visit: 6/8/2024 Posts: 6 Rating: (0)	Hello, I have read the operation instruction and datasheet for this model and the memory upgrade is up to 8 Gb. But, it is possible to install 2 x 8 Gb PC3-8500 memory modules, or more if the memory module is PC3-8500, or this will not work. Thank you.

Suggestion To thank Quote Answer

6/3/2013 7:58 AM	Rate (0)
grg Experienced Expert Joined: 3/2/2009 Last visit: 8/6/2024 Posts: 94 Rating: (8)	Hello Java_user, the max size of RAM possible is 8GB (2x4GB). Regs, GrG

Suggestion To thank Quote Answer

11/7/2013 5:13 PM	Rate (0)
Timmy Posts: 41 Rating: (0)	I have tried to upgrade the 847C from 2 2GB chips to 2 4GB chips but have not been successful in getting memory that will work. I have followed the specs per the manual which is DIMM DDR3 memory, 1066 MT/sec, type PC3-8500, unbuffered with or without ECC. I have gotten two different sets of memory. The first set caused the PC to fail to post and just restart over and over again. The second set allowed the computer to start and post however it would not make it through the physical memory check. It would freeze at 75% and have to be hard booted. Has anyone purchased any 4GB chips for an 847C and had success with it? If so can you please send me to the place your purchased it or pictures or anything to go on? Thanks in advance. Specs of RAM that made the computer restart over and over again Add-On Computer 4GB 1066MHz DDR3-1066/PC3-8500 ECC DDR3 SDRAM 240 Pin DIMM # AM1066D3QRLPR/4G
Timmy Posts: 41 Rating: (0)
Suggestion To thank Quote Answer

11/11/2014 7:13 AM	Rate (0)
HITUL007 Posts: 15 Rating: (1)	We have same problem. Have you found any solution for the same??
HITUL007 Posts: 15 Rating: (1)
Suggestion To thank Quote Answer

2/11/2015 2:39 PM	Rate (0)
Timmy Posts: 41 Rating: (0)	Memory that worked G.SKILL RIPJAWS F3-8500CL7D-8GBRL, DDR3-1066 CL7-7-7-18 1.50v PC3-8500 4Gx2 Plug and Play
Timmy Posts: 41 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on