Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

880M PLC Cable

Created by: chinna at: 7/10/2013 1:58 PM (1 Replies)

Rating (0)

Thanks 1

2 Entries

7/10/2013 1:58 PM	Rate (0)
chinna Experienced Member Joined: 9/10/2007 Last visit: 8/13/2024 Posts: 78 Rating: (3)	Dear Experts, As per the PCIN Wire layout i made the cable as 25 Pin Side 9 Pin Side (For Laptop) 1 1 2 2 3 3 6 4 7 5 20 6 5 7 4 8 With this cable i can able to download parameters. My doubt is whether the same cable suits for PLC upload or download. I tried to get the details from Universal Interface manual but it is not clear for me.Can anyone guide me. Regards, K.Sunil

Suggestion To thank Quote Answer

7/10/2013 3:37 PM	Rate (0)
APC Tech Team Posts: 391 Rating: (50)	chinna Dear Experts, As per the PCIN Wire layout i made the cable as 25 Pin Side 9 Pin Side (For Laptop) 1 1 2 2 3 3 6 4 7 5 20 6 5 7 4 8 With this cable i can able to download parameters. My doubt is whether the same cable suits for PLC upload or download. I tried to get the details from Universal Interface manual but it is not clear for me.Can anyone guide me. Regards, K.Sunil Universal Interface manual The description for the PG 750 will fit best use Cabel layout 6FC9 344-4R Change the allocation of 25 Pin on 9 Pin right side for information about RS232 http://www.camiresearch.com/Data_Com_Basics/RS232_standard.html#anchor242192 follow the instructions chapter 8.2.29 SIMATIC PG 750 programmer
APC Tech Team Posts: 391 Rating: (50)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ekalavya

|

Share this page:

Share this page on...

Follow us on