Industry Online Support
Technical Forum
Navigation
Rating 
Thanks 0
1 Entries
| 7/25/2009 12:58 AM | |
Joined: 2/12/2009 Last visit: 5/14/2011 Posts: 5 Rating:
|
Hi a doubt about technology cpu again this time i´m trying to use the template for a 3d motion with cams, i followed the instruction on the manual, but it simple doesn't work. i inserted the fb 505 on an fb1 an then i called the fb1 on 0b1, the fb 505 sends an errorsource ff13, wich means an "error during stopping axis vm" i have checked everything, an nothing results. on theinstance db of the fb 505 (i created as db 505) i wrote the right number of the db's created with the tom. i copied all the blocks on the template. please help me, im desperate, i have more than one week trying to make this program to work. i attached a copy of the fb 505. Attachmenterror.zip (151 Downloads) |
Last edited by: O_Moderator at: 7/27/2009 9:55 AMnew subject after splitting |
|
Follow us on