Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

About Flow Sensor MAG 5100 W

Created by: DHN1985 at: 5/10/2011 12:13 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

5/10/2011 12:13 PM	Rate (0)
DHN1985 Posts: 8 Rating: (0)	Hi there, We have some questions about Flow sensor MAG 5100 W: In Catalog Flow sensor MAG 5100 W, says: + NBR Hard Rubber and Ebonite Hard Rubber liner for all water applications --> Do you have any certificate about NBR Hard Rubber safe in drinking water application? Please send us. + Housing and flanges (NBR lining) is Carbon steel, with corrosionresistant two-component epoxy coating (min. 150 μm) Corrosivity category C4, according to ISO 12944-2. We don't know which exact Carbon steel is? Carbon steel ASTM A 105 or what? + Electrode material: Hastelloy. What is exact type of Hastelloy? Hastelloy C-4 or C-22? Please help us. Glad to hear it from you soon. Thank you very much.
DHN1985 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

5/11/2011 12:39 AM	Rate (0)
danw Gold Expert Joined: 3/28/2010 Last visit: 12/4/2024 Posts: 1092 Rating: (215)	You can download the certificates yourself: https://support.automation.siemens.com/US/llisapi.dll?func=cslib.csinfo&lang=en&siteid=cseus&aktprim=0&extranet=standard&viewreg=US&objid=16878664&treeLang=en

Suggestion To thank Quote Answer

5/11/2011 3:30 AM	Rate (0)
DHN1985 Posts: 8 Rating: (0)	Hi Danw, Thank you for your support!!! I can not find certificate for NBR Hard Rubber safe in drinking water in the link you recommend us. There is only EPDM rubber drinking water approval. How about the other questions about Housing and Flange material, electrode material? Please feedback to us soon.
DHN1985 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

5/11/2011 11:55 PM	Rate (0)
DavieS Posts: 64 Rating: (2)	Here's the link to the NSF certificate for drinking water: https://support.automation.siemens.com/US/llisapi.dll?func=cslib.csinfo&lang=en&siteid=cseus&aktprim=0&extranet=standard&viewreg=US&objid=16878664&treeLang=en You will see the electrodes are Hastelloy C-276 and only EPDM is approved which is suitable for drinking water, why would you need Ebonite? The process flanges are A105 but you can have 304 and 316L SS flanges on the MAG3100 if desired.
DavieS Posts: 64 Rating: (2)
Suggestion To thank Quote Answer

4/19/2015 11:18 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 12/3/2024 Posts: 4114 Rating: (195)	new question published by AutoGen_401437 is split to a seperate thread with the subject Why is Excitation by two same MAG5100W DN400 different. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on