Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

about lifebeat monitoring

Created by: viper9403 at: 11/14/2007 8:09 AM (7 Replies)

Rating (2)

Thanks 1

8 Entries

11/14/2007 8:09 AM	Rate (0)
viper9403 Posts: 25 Rating: (0)	I use WinCC V6.2 I want to use lifebeat monitoring , and I setting it follow below http://support.automation.siemens.com/WW/view/en/9918678 first question：Why don't I see @config.pdl in Graphics Designer ? second question： citation：Now you can call the lifebeat monitoring in Runtime by pressing the button indicated below: I don't know how to find it ? Is it created by self , or in WinCC tool bar , or.... ?
viper9403 Posts: 25 Rating: (0)
Suggestion To thank Quote Answer

11/14/2007 9:57 AM	Rate (1)
Dorftrottel? Silver Member Joined: 8/10/2006 Last visit: 8/13/2024 Posts: 298 Rating: (29)	Here's a step-by-step document I prepared a while ago. Zip file of a PDF because it's so big. Hope it helps. Jim Attachment Configuring Lifebeat Monitoring for an OS Client.zip (1010 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users NANDISH1

11/15/2007 7:36 AM	Rate (0)
Dec Gold Expert Joined: 5/19/2006 Last visit: 9/16/2024 Posts: 549 Rating: (107)	Do you have Basic Process Control optioninstalled in WinCC? If yes then Do you have the project jump-started with OS-ProjectEditor? If yes do you have configured Lifebeat Monitoring application? If yes then you should have the buttons with LBM and @CONFIG.PDL screen. Dec
	Last edited by: Dec at: 15.11.2007 07:44
Suggestion To thank Quote Answer

10/16/2008 12:36 PM	Rate (0)
EULER1313 Posts: 86 Rating: (1)	Hi all, Iconfigured my connections in LifeBeat monitoring..... When i press Update it generates @CONFIG.pdl I cann`t Find that pdl in Graphics Designer where can i find it?? Attachment Q.JPG (501 Downloads)
EULER1313 Posts: 86 Rating: (1)	Last edited by: EULER1313 at: 10/16/2008 1:01 PM Last edited by: EULER1313 at: 10/16/2008 1:00 PM I have Basic Process Control installed
Suggestion To thank Quote Answer

10/20/2008 9:01 AM	Rate (0)
EULER1313 Posts: 86 Rating: (1)	Please does any one know whyI cann`t Find that pdl in Graphics Designer? where can i find it??
EULER1313 Posts: 86 Rating: (1)
Suggestion To thank Quote Answer

10/27/2008 10:08 AM	Rate (0)
EULER1313 Posts: 86 Rating: (1)	Please does any one know whyI cann`t Find that pdl in Graphics Designer? where can i find it??
EULER1313 Posts: 86 Rating: (1)
Suggestion To thank Quote Answer

11/5/2008 11:00 AM	Rate (0)
perdahlqvist Gold Member Joined: 10/26/2005 Last visit: 9/13/2024 Posts: 284 Rating: (50)	Hi! From WinCC, can You see any other "@"-files ?, they are many. Have You tried to view the folder "D:\SCADANATGAS\Gracs" using explorer, and is the file there ? There can be that @-files are selected to not be shown, its one setting in wincc.
	Last edited by: perdahlqvist at: 11/5/2008 11:02 AM Last edited by: perdahlqvist at: 11/5/2008 11:02 AM Path...
Suggestion To thank Quote Answer

11/5/2008 5:33 PM	Rate (1)
Danielle Posts: 1275 Rating: (123)	Hi, Did you use OS-Project Editor? When you use it to configure your project it autpmatically creates a lot of "@" screens in your project. Among those there's the "@@ConfigTypicals.PDL", which contains the typicals used to create the "@CONFIG.Pdl"... since the system uses the "@@ConfigTypicals.PDL" as a reference, I think since if your project doesn't have it, the "@CONFIG.PDL" isn't generated... Best regards, Danielle
Danielle Posts: 1275 Rating: (123)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on