Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

About Meterbus-Modbus converter

Created by: Ton Verra at: 12/20/2010 12:03 PM (2 Replies)

Rating (1)

Thanks 1

3 Entries

12/20/2010 12:03 PM	Rate (0)
Ton Verra Gold Member Joined: 4/20/2007 Last visit: 12/13/2024 Posts: 728 Rating: (43)	LucaM Normally we use Meterbus-Modbus converter and on other side master Modbus on ET200S. The gateway is: http://www.resi.cc/2g/products/types/MBUS/index.php3?language=english Hi Luca, Whats the price approx for the converter? How do you process the data? Sorry if my questions seem stupid, I don't know very much about Modbus or M-bus..
	Last edited by: CS Moderator at: 12/20/2010 12:47 PM new subject after splitting refered post inserted
Suggestion To thank Quote Answer

1/8/2011 4:39 PM	Rate (1)
LucaM Advanced Member Joined: 12/29/2008 Last visit: 9/17/2024 Posts: 24 Rating: (3)	Price below 300 € Gateway arrives with software for configuration. Automatically read devices on meterbus side and map in MODBUS HOLDING REGISTER AREA. Save configuration and in all its life gateway bring meterbus data on modbus data with the frequency You have indicate. Attention if meterbus device are supplied by a battery, meterbus frequency read must be set low, in other case You consume battery fastly.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Ton Verra

1/24/2011 12:20 PM	Rate (0)
Ton Verra Gold Member Joined: 4/20/2007 Last visit: 12/13/2024 Posts: 728 Rating: (43)	Hey! Sorry for the late reply, but thanks! I'll check it out soon!

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on