Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

ABOUT OF BS 121, BS 122 & BS 123

Created by: fjmm at: 12/7/2010 6:47 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/7/2010 6:47 PM	Rate (0)
fjmm Posts: 19 Rating: (1)	I am converting a S5 program into S7, it is a FB which I need to convert, my question is: in S7 how to do it?? please check the file Thank You FJ Attachment:010231.JPG FJ
fjmm Posts: 19 Rating: (1)
Suggestion To thank Quote Answer

12/7/2010 7:05 PM	Rate (0)
UMENCHO Diamond Expert Joined: 3/21/2006 Last visit: 10/1/2024 Posts: 10229 Rating: (1181)	Hello, These (BS121,122 & 123) could be contain the CPU cycle time. Even in your program you could see transfering of this times to correspond symbol variables. . Current scan time in BS 121 - in your code ACTU varieble; • Maximum scan time in BS 122 - MAXI, • Minimum scan time in BS 123 - MINI; And fritz If you want to retain this feature in Step7, you'll get the same three cycle time values supplied as part ofOB1's TEMP variables as shown below: - OB1_PREV_CYCLERun time of previous scan (ms) - OB1_MIN_CYCLEMinimum cycle time (ms) since the last startup - OB1_MAX_CYCLEMaximum cycle time (ms) since the last startup Best regards, Hristo Mihalev
	Last edited by: UMENCHO at: 12/7/2010 7:17 PM Last edited by: UMENCHO at: 12/7/2010 7:14 PM
Suggestion To thank Quote Answer

12/8/2010 12:39 AM	Rate (0)
fjmm Posts: 19 Rating: (1)	Hello UMENCHO: I got it!!!! Thank You so much FJ
fjmm Posts: 19 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on