Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

about sinamics g150 temperature sensor

Created by: volcanoos at: 8/28/2013 9:10 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

8/28/2013 9:10 AM	Rate (0)
volcanoos Posts: 27 Rating: (0)	dear all, i ve sinamics g150 driver and ve realized temperature of motor is minus. its -132 and then i ve changed max temperature 130 and it kept go on working. then i ve changed cables of kty84 but didnt work. it s still minus ? u ve any idea about hat problem ? u re able to see photos at the attachment Attachment 5 motor sıcaklık.jpg (70 Downloads)
volcanoos Posts: 27 Rating: (0)	Last edited by: volcanoos at: 8/28/2013 9:11 AM
Suggestion To thank Quote Answer

8/28/2013 10:28 PM	Rate (0)
zako_ Gold Member Joined: 5/22/2012 Last visit: 3/24/2022 Posts: 895 Rating: (65)	I hope you have take care for the correct wiring of the KTY84 PINs - otherwise the sensor could be damaged . Its not a normal resistance, its a semicontactor element.
	Last edited by: zako_ at: 8/28/2013 10:30 PM Last edited by: zako_ at: 8/28/2013 10:30 PM
Suggestion To thank Quote Answer

9/3/2013 1:58 PM	Rate (0)
volcanoos Posts: 27 Rating: (0)	dear zako, i changed pins, but it s still minus ?
volcanoos Posts: 27 Rating: (0)
Suggestion To thank Quote Answer

9/3/2013 10:59 PM	Rate (0)
zako_ Gold Member Joined: 5/22/2012 Last visit: 3/24/2022 Posts: 895 Rating: (65)	... no, the PIN have to be correct wired. So I suppose the temperature sensor is destroyed.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_G

Follow us on