Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

About Trends

Created by: pratik7332 at: 5/20/2013 8:46 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

5/20/2013 8:46 AM	Rate (0)
pratik7332 Bronze Member Joined: 11/26/2009 Last visit: 1/17/2025 Posts: 223 Rating: (1)	Hi, I want to display certain parameters on the trends but they have different ranges , i mean some of them are of 0-1500 and some of them are 0-5. I want to embed all that parameters in single trend. I also want to know how can i change the y-axis values in runtime in order to hide the other graphs and get the print of the selected parameters while my x-axis is time .

Suggestion To thank Quote Answer

5/21/2013 1:52 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, Can you describe more what you want to do? Which panel and trend view do you use? Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

5/22/2013 9:31 AM	Rate (0)
pratik7332 Bronze Member Joined: 11/26/2009 Last visit: 1/17/2025 Posts: 223 Rating: (1)	Hi, I am using Wincc Runtime advanced V11. in which i am using "trends" not F(x) . I have different parameters to display on single graph ranges are . 0-1 0-100 0-125 0-700 0-1300 its natural that if i take the y-axis scale 0-1300 the other trends are not visible good. I want to display all these graphs as if they are ploted individualy and y-axis range can be selected. OR i want the system where only selected paramters are send to trends frp plotting.

Suggestion To thank Quote Answer

5/22/2013 2:35 PM	Rate (0)
Tweety Posts: 3037 Rating: (192)	Hello, You can use a tag for Axis end. Then you can write in this tag the different values( 1300, 700, ....). Or you use more trend views. You can hide these views about the animations. Tweety
Tweety Posts: 3037 Rating: (192)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Picture Controls

Follow us on