Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

About WinCC 4.0 License Problem

Created by: Deleted User at: 9/5/2008 10:58 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

9/5/2008 10:58 AM	Rate (0)
Deleted User Posts: 767 Rating: (69)	Hello to All. i have pcs7 v4.0 and includes Wincc 4.0.2 This is my problem, i formatted my pc which uses windows nt workstation 4.0 and re-install all simatic products and my licenses (for Winccmy license is Wincc RC 64K). But when i open my Wincc Project, at the bottom-right of window it says "External tag:2021/ License: 64k" but when i put it into Runtime mode, at the bottom-right of window it says to me"External tag:2021/ License: DEMO" so i cant use my project online,do i need any additional license or whats wrong?
Deleted User Posts: 767 Rating: (69)
Suggestion To thank Quote Answer

9/5/2008 11:27 AM	Rate (0)
BadBit Posts: 125 Rating: (26)	Hi, do you have further license (RC/RT) smaller 2021 tags installed? Can youposta screenshot from your ALM (installed Licenses)? Regards
BadBit Posts: 125 Rating: (26)
Suggestion To thank Quote Answer

9/5/2008 1:27 PM	Rate (0)
Wizard Diamond Member Joined: 4/24/2006 Last visit: 1/14/2025 Posts: 8804 Rating: (1173)	Dear sim-a-tech, Please have a look at the LOG files. Especially License.log, here is mentioned which license is missing. Perhaps you are using something, that requires another license. Best regards, Wizard

Suggestion To thank Quote Answer

9/8/2008 9:37 AM	Rate (0)
Khaled_Ezzat Silver Member Joined: 9/7/2007 Last visit: 10/9/2024 Posts: 550 Rating: (62)	Dear Sim-a-tech Automation license manager takes the first license which is always the smaller No. of tags so if you have one license less than 2021 it will act as a demo license
	Best Regards
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on