Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Absolute encoder

Created by: SMHM at: 2/1/2010 11:46 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/1/2010 11:46 AM	Rate (0)
SMHM Posts: 6 Rating: (0)	Respected experts my question is that i want to directly connect absolute encoder to my PLC (s7-300).Which FM Module is used and how its connect?via a back plane bus....?????? thnks for answers
SMHM Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

2/1/2010 12:30 PM	Rate (0)
miami Platinum Expert Joined: 8/31/2005 Last visit: 8/20/2024 Posts: 2198 Rating: (328)	Hello SMHM, Have a look on 1SSI Modul (ET 200S) or SM 338 PosInput (ET 200M) If you have more than one, aIM 174 (isocrone PROFIBUS) may be a solution too.

Suggestion To thank Quote Answer

2/8/2010 6:58 AM	Rate (0)
SMHM Posts: 6 Rating: (0)	thanks for timely rply is FM-352 is suitable to connect absolute encoders to S7-300 PLC Directly w8ing 4 ur rply
SMHM Posts: 6 Rating: (0)
Suggestion To thank Quote Answer

2/8/2010 7:55 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 9/10/2024 Posts: 10228 Rating: (1181)	Hello, Supported absolute encoders Absolute encoders with serial interface. Position data are transferred synchronously using the SSI protocol (SynchronousSerialInterface). FM 352 only supports GRAY code. Due to the arrangement of the data bits in the transferred frames, the data formats "fir tree", "half fir tree" and "right-justified" are used. More info you could find in manual in Entry ID: 2103044 Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on