Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Accelaration/Descelaration Time

Created by: List at: 7/19/2013 10:46 AM (6 Replies)

Rating (0)

Thanks 1

7 Entries

7/19/2013 10:46 AM	Rate (0)
List Posts: 664 Rating: (17)	Hai All, I have commissioned 828D controller for a milling application. How can i observe the accelaration and Decelaration of an axis ?And How can i change this also.? I have found the STOP COURSE and STOP FINE Parameters. And the standstill delay and position parameter also. How can i calculate the accelaration & Decelaration time.?? Thanks&Regards, Raj
List Posts: 664 Rating: (17)
Suggestion To thank Quote Answer

7/19/2013 11:43 AM	Rate (0)
tavi Advanced Member Joined: 1/30/2006 Last visit: 1/22/2024 Posts: 50 Rating: (7)	Hello Try MD 32300 is max axis acceleration.the calculation it depends about the rotation or liniar axis and so on.

Suggestion To thank Quote Answer

7/21/2013 2:21 PM	Rate (0)
List Posts: 664 Rating: (17)	Hai tavi, Thanks for your reply, In my application, while stopping and starting the motor motion, i have to know about how much time it is taking,presently ramp up and ramp down is very less.. It making jurking of machine. The machine is newly make. have to note down the ramp characteristics.. Having Idea, please help... Thanks& Regards, Raj
List Posts: 664 Rating: (17)
Suggestion To thank Quote Answer

7/29/2013 11:27 AM	Rate (0)
List Posts: 664 Rating: (17)	Hai All, Anyone having idea.. Thanks&Regards, raj
List Posts: 664 Rating: (17)
Suggestion To thank Quote Answer

7/30/2013 6:48 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello, Better you need to optimize your axis....rather than checking the ramup time... Optimizing the axis can solve your problem... Check it out.. Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

7/31/2013 8:31 AM	Rate (0)
List Posts: 664 Rating: (17)	Hai, Can you please tell me the procedure and precausion for doing the drive optimisation. I have seen one softkey Optimisation test on startup window.can we able to do the drive optimisation through this window? Thanks&Regards, Raj
List Posts: 664 Rating: (17)
Suggestion To thank Quote Answer

7/31/2013 6:43 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Karnan Hai, Can you please tell me the procedure and precausion for doing the drive optimisation. I have seen one softkey Optimisation test on startup window.can we able to do the drive optimisation through this window? Thanks&Regards, Raj Hello, Yes you need to do with this key.....but you need to watch out lot of things while tunning....You need to physically do it the only you can understand....you can refer the DOCON cd regarding this... Regards, Prakash
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users List

|

Share this page:

Share this page on...

Follow us on