Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

access code for NBRN console

Created by: electro35 at: 4/18/2013 12:05 PM (4 Replies)

Rating (3)

Thanks 0

5 Entries

4/18/2013 12:05 PM	Rate (0)
electro35 Member Joined: 3/15/2010 Last visit: 8/16/2022 Posts: 2 Rating: (0)	Hello, I have a console STAEFA NBRN-FRNL I've lost access codes for levels 2 and 3. How to access them without the codes? thank you

Suggestion To thank Quote Answer

4/26/2013 8:41 AM	Rate (2)
Albis Silver Member Joined: 6/4/2010 Last visit: 9/30/2024 Posts: 387 Rating: (128)	Hi Electro35, Resetting the access code in the famous INTEGRAL AS1000 NBRN hand terminal is quite simple. Follow the steps below: a)Open the device b)Power-up the device c)Press the reset button S1 on the PCB d)Close the device e)Set the new access code Best regards, Albis

Suggestion To thank Quote Answer

5/30/2013 10:39 AM	Rate (0)
electro35 Member Joined: 3/15/2010 Last visit: 8/16/2022 Posts: 2 Rating: (0)	Thank you, it's ok!

Suggestion To thank Quote Answer

5/4/2015 10:41 AM	Rate (0)
aks1403 Posts: 1 Rating: (0)	Can you please give detailled process of resetting NBRN passwords and setting it again. Thanks Neeraj
aks1403 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

5/7/2015 5:22 PM	Rate (1)
Albis Silver Member Joined: 6/4/2010 Last visit: 9/30/2024 Posts: 387 Rating: (128)	Dear Neeraj, You can find the information about how to reset the password in the thread above. The information how the set a new password can be found in the NBRN operator terminal manual, K23, which is attached to this posting. The relevant information is in chapter 4.3 on page 102. Best regards, Albis Attachment 022_k23en.pdf (1224 Downloads)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on