Access tool help

Hi i am trying to use access tool to pull counts every 60 seconds but am having issues were it doesnt log every 60 seconds sometimes it 64 seconds sometime its 65, why does it not just log every 60 seconds like it is supoosed to?? example attached

Thank you in advance for any help

Craig

Most likely your computer's is busy running some other task and the Excel can't fire the task at the scheduled time.

Take a look at your task manager and see if CPU/memory is high ?

Try writing a VBA macro and log down time every 65secs and see if it's able to do that timely? 

https://www.myonlinetraininghub.com/scheduling-macros-in-excel-with-application-ontime

LOGO! Support

For enable me to check it, please post a wireshark file of your application.

And name the IP addresses of your LOGO! and your PC.

If possible disconnect all other Ethernet parts for the test.

Wireshark is available at the following link:

www.wirehark.org

Hi 

Thank you for the reply i will have to check with my IT department to see if they will allow me to run this software. I have tried changing the synchronization period to 1 second and i get the odd random seconds missing

Thank you

Craig