Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Access V5.5 with V11

Created by: rcklbstr at: 2/24/2014 5:40 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/24/2014 5:40 PM	Rate (0)
rcklbstr Posts: 1 Rating: (0)	I've been out of the PLC debug genre for a few years and am used to using v5.5 for retrieving/archiving and opening PLC projects to debug/modify hardware configs and ladder. My new company has "portal TIA V11". Very different. Is it possible to upload/archive/open, etc. programs on somewhat older machines that have v5.5 programs? 840D in general with powerline and solution line. Thanks
rcklbstr Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

2/24/2014 6:39 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (999)	rcklbstr I've been out of the PLC debug genre for a few years and am used to using v5.5 for retrieving/archiving and opening PLC projects to debug/modify hardware configs and ladder. My new company has "portal TIA V11". Very different. Is it possible to upload/archive/open, etc. programs on somewhat older machines that have v5.5 programs? 840D in general with powerline and solution line. Thanks Only newer CPU are supported by TIA, not the older ones. For Details check this link: http://support.automation.siemens.com/WW/view/en/50029532
IBN-Service Posts: 8946 Rating: (999)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on