I am new to this forum and I am currently working on an S7-1200 controller with a HMI panel, I am doing simulation on PLCSIMU, I have faults to program and to display on the part of the alarms of my Panel, the concern is that it asks me to acknowledge my alarms and I do not know how to do, I already included and program my trigger variables but the concern is that I am in the class of errors alarms It asks me to add an acknowledgment variables.

Thanks for answering, Daraen

Hi Daraen,

Please give boolean tag to ACK alarms tags. It can be internal or PLC tag.

Dear Dart Tekabi,

can you give us more Information about your hardware and software?

https://support.industry.siemens.com/tf/ww/en/posts/what-do-we-need-to-solve-your-problem/141582/?page=0&pageSize=10

With best regards

rh1990

Hello.

Are you asking about the "acknowledge" button that you include on your alarm view?

Bye.

Daraen

I am new to this forum and I am currently working on an S7-1200 controller with a HMI panel, I am doing simulation on PLCSIMU, I have faults to program and to display on the part of the alarms of my Panel, the concern is that it asks me to acknowledge my alarms and I do not know how to do, I already included and program my trigger variables but the concern is that I am in the class of errors alarms It asks me to add an acknowledgment variables.

Thanks for answering, Daraen

Hello.

A very informative resource you are offering. Too bad the S7-1200 is not mentioned in this reference. No disrespect - The question was about the S7-1200.

Regards.

Murof

Hello Daraen

Here is everything  described you have to know :

https://support.industry.siemens.com/cs/ww/en/view/62121503

Bye Murof