Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Activate S110 CU305PN & ServoMotor with STARTER

Created by: Ssung at: 11/6/2015 11:11 AM (12 Replies)

Rating (0)

Thanks 1

Result pages:: |; 1 | 2; |

13 Entries

Entries per page: 10 | all

11/9/2015 12:52 PM	Rate (0)
Ssung Advanced Member Joined: 7/7/2015 Last visit: 3/8/2023 Posts: 55 Rating: (0)	Thank you! Now I've set Configuration. But I can't download project to CU305. There are 2 Fault in SERVO. 2 Fault & 3 Warnings. Warning 1416, Topology: Comparison additional component in actual topology 7502, Drive:Motor data set is not assigned to a drive data set[1] 8526, PROFINET : No cyclic connection Fault 7950, Drive: Incorrect motor parameter [parameter cause: 311] 1043, Fatal error at project download [Fault cause: 14]

Suggestion To thank Quote Answer

11/9/2015 1:22 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 3/20/2023 Posts: 21352 Rating: (2818)	please can you upload the project here? I looks like the same error you have allready see.

Suggestion To thank Quote Answer

11/9/2015 1:28 PM	Rate (0)
Ssung Advanced Member Joined: 7/7/2015 Last visit: 3/8/2023 Posts: 55 Rating: (0)	I Activate Motor!! In Offline mode, I manually configured and download project! Thank you very much!

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on