Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

active back plane in ET200M

Created by: lidumazie at: 11/9/2010 9:06 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

11/9/2010 9:06 AM	Rate (0)
lidumazie Posts: 14 Rating: (0)	Hi I have question about active back plane in ET200M. module are not suitable for use in active back plane ET200M such as (6es7 331-7kb00-0ab0). if ET200M has active backplane, can it be connected to PG on profibus? thank you
lidumazie Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

11/9/2010 12:49 PM	Rate (0)
hdhosseini Diamond Member Joined: 1/28/2009 Last visit: 9/10/2024 Posts: 6849 Rating: (1365)	Hello dear member Check the attachment , it may answer some of your questions. regards Attachment active.pdf (500 Downloads)
	Demo Channel on Youtube
Suggestion To thank Quote Answer

11/9/2010 12:55 PM	Rate (0)
Ammy Platinum Member Joined: 4/19/2008 Last visit: 9/3/2024 Posts: 1525 Rating: (159)	hdhosseini Hello dear member Check the attachment , it may answer some of your questions. regards Hi, In attachment it says only 8 Module but in the New Relase it support 12 Module.
	Ammy New for every one.............. “No duty is more urgent than that of returning thanks.” If Problem Solved......! I can't help you privately - please post in the Forums
Suggestion To thank Quote Answer

11/9/2010 1:11 PM	Rate (0)
hdhosseini Diamond Member Joined: 1/28/2009 Last visit: 9/10/2024 Posts: 6849 Rating: (1365)	dear ammy see page 2 of attached .pdf "greater number of modules with the IM153-2BAX2 and IM 153-4AA0X" regards Attachment active.zip (137 Downloads)
	Demo Channel on Youtube
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on