Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

actuator

Created by: gkhn__ at: 4/5/2011 8:17 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/5/2011 8:17 PM	Rate (0)
gkhn__ Posts: 27 Rating: (0)	hi, ı have s7-300 plc and analog output card , ı want to control an actuator with 4-20 mA signal , somebody know the electrical connections , which points ı need to use on analog output ? best regards,
gkhn__ Posts: 27 Rating: (0)
Suggestion To thank Quote Answer

4/5/2011 8:28 PM	Rate (0)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 5/3/2024 Posts: 5697 Rating: (715)	that can be found in the manual : http://support.automation.siemens.com/WW/view/en/8859629 Chapter 6 If you have trouble to read it please tell us more, exact module number and datasheet of your actuator helps. Best regards, Marcjan
	Last edited by: Marcjan at: 4/5/2011 8:30 PM Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on