Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Acyclic comm. with Sinamics - writing multiple parameters to a G120 using SFC58

Created by: plc_user at: 9/5/2007 12:06 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

9/5/2007 12:06 AM	Rate (0)
plc_user Posts: 57 Rating: (0)	Hey, Can somebody give an example of writing multiple parameters to a G120 using SFC58? It works fine for one parameter, but not for multiple. Or is this a restriction? Thanks
plc_user Posts: 57 Rating: (0)	Last edited by: CS Moderator at: 07.09.2007 13:36 new subject after splitting
Suggestion To thank Quote Answer

9/11/2007 11:54 AM	Rate (0)
mmf80 Advanced Member Joined: 5/4/2007 Last visit: 10/15/2007 Posts: 51 Rating: (1)	Please see: http://support.automation.siemens.com/WW/view/en/22339653/133000

Suggestion To thank Quote Answer

9/19/2007 12:23 AM	Rate (0)
plc_user Posts: 57 Rating: (0)	After looking in the manual that is installed together with Drive ES Simatic, I found the right structure of the DB for change multiple parameters in a G120 simultanous. ...[snip] Thanks
plc_user Posts: 57 Rating: (0)	Last edited by: CS Moderator at: 20.09.2007 13:42 new question splitted to a new thread /tf/WW/en/Posts/12122#52139
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_G

Follow us on