Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Additional Terminals on Logo! AM2 AQ analog output module

Created by: AndreyG at: 9/10/2013 9:14 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

9/10/2013 9:14 PM	Rate (0)
AndreyG Posts: 25 Rating: (0)	Hello, I just receive my AM2 AQ analog output extension modules, trying them first time. The modules have four extra terminals in a row above the row of output terminals. These Terminals marked as X11 and PE. Please advice what is the functionality of these terminals and how they can be used. Thank you, Andrey
AndreyG Posts: 25 Rating: (0)
Suggestion To thank Quote Answer

9/11/2013 8:19 AM	Rate (0)
Helmut_13 Posts: 2930 Rating: (432)	Hi, with the AM2 AQ you have got a product information sheet. Here the terminals and the wiring is descriped. You also can find it in the LOGO! manual as well. Hope this helps
Helmut_13 Posts: 2930 Rating: (432)
Suggestion To thank Quote Answer

9/11/2013 8:43 AM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 12/13/2024 Posts: 5697 Rating: (715)	Hello, You can find the manual Here And attached the connections of the module. While you are surfing on the web have a look at: Application examples for LOGO! Regards, Marcjan Attachment AM2AQ.pdf (506 Downloads)
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

4/3/2017 10:48 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	New question published by ZeusT32 is split to a separate thread with the subject Logo! AM2 AQ analog output module, device uses stereo Aux cable. Best regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on