Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Advanced recipe view mode column widths TP700

Created by: thanozn at: 1/15/2014 9:42 AM (4 Replies)

Rating (3)

Thanks 7

5 Entries

1/15/2014 9:42 AM	Rate (0)
thanozn Bronze Member Joined: 7/29/2008 Last visit: 12/11/2023 Posts: 96 Rating: (4)	Hi, I am using a TP700 comfort panel, TIA v12 SP1 and a recipe view in advanced mode for the recipes. By defaut the column widths are not adequate, so the operator must adjust the width to see the full entry name. Is it possible to permanently fix the column widths, so that the operator doesn't have to do it after every machine restart?

Suggestion To thank Quote Answer

1/15/2014 3:12 PM	Rate (0)
K!ke Posts: 1299 Rating: (135)	Hello, I don't know a way to fix these columns. but you can alsocreate your own recipe screen https://www.automation.siemens.com/mdm/default.aspx?DocVersionId=51502341771&TopicId=28479890059 K!ke
K!ke Posts: 1299 Rating: (135)
Suggestion To thank Quote Answer

4/24/2014 12:43 AM	Rate (3)
FilipAP Regular Member Joined: 9/24/2009 Last visit: 11/12/2023 Posts: 2 Rating: (3)	I have the same problem. I found solution: Use context menu (right-mouse click) on "Recipe view" object, command "Edit" and you can edit width and columns order! This is from hlep system of TIA portal...(search "recipe view width") Note If you select the "Edit" command in the context menu of the recipe view, the recipe view becomes active. To activate the recipe view, the zoom factor must be set to 100%. You can set the column width and the position of the "Entry name" and "Value" columns in active mode. It is the same for other "view" objects (alarms, users, ...)

Suggestion To thank Quote Answer
This contribution was helpful to 7 thankful Users vipz K!ke AutoGen_216475 Jan_Budweis klabuda Reva P j.ubink

9/15/2015 8:49 PM	Rate (0)
Jan_Budweis Advanced Member Joined: 10/28/2009 Last visit: 11/23/2023 Posts: 9 Rating: (2)	It is good to know, that WinCC is "right clicking" software :-)

Suggestion To thank Quote Answer

9/16/2015 10:01 AM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 12/11/2023 Posts: 11813 Rating: (1518)	Hello Everybody you can also hold Ctrl - Button and do a Doubleklick on the Control, its the same as Rightklick-> Edit Solution. It works also in Alarmcontrol. Bye Murof
	Last edited by: Murof at: 9/16/2015 10:02:37 AM If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Archives / Recipes

Follow us on