Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

After a second download all previous alarms are not working anymore.

Created by: wilske at: 4/11/2022 1:48 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

4/11/2022 1:48 PM	Rate (0)
wilske Regular Member Joined: 10/25/2011 Last visit: 10/18/2022 Posts: 6 Rating: (0)	Hello, I have the same problem. I'am using TIA portal V17 with a MTP 1000. PLC is a 1214FC I already tryed a sofware (rebuild all) and hardware on the HMI and PLC. After a second download all previous alarms are not working anymore. ------------------------------------------------------------------------------------------ Split from MTP1000 Discrete alarms don't work.
	Last edited by: wilske at: 04/11/2022 16:41:45 Last edited by: wilske at: 04/11/2022 16:42:05 Last edited by: Jen_Moderator at: 04/22/2022 10:24:01 New subject after splitting
Suggestion To thank Quote Answer

4/12/2022 12:19 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 12/5/2023 Posts: 4281 Rating: (1379)	Hi, Did you download the HMI or the PLC? If you reset the HMI (or download the OS), is it return to work?
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

4/22/2022 8:24 AM	Rate (0)
wilske Regular Member Joined: 10/25/2011 Last visit: 10/18/2022 Posts: 6 Rating: (0)	I downloaded the OS agian. For the moment the problem is solved. Thanks!

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Denilson Pegaia

|

Share this page:

Share this page on...

Follow us on