Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

After Alarm 30042, Motor going to stop

Created by: Ahmed at: 1/22/2015 2:03 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

1/22/2015 2:03 PM	Rate (0)
Ahmed Experienced Member Joined: 2/20/2007 Last visit: 11/19/2024 Posts: 122 Rating: (2)	Dear all, After Alarm 30042 Is Motor going to stop on Fault after 500 hours Regards, Ahmed ----------- New subject after splitting from Reset Sinamics fan counter hours .
	Last edited by: Min_Moderator at: 1/22/2015 3:41 PM Splitted Last edited by: Ahmed at: 1/22/2015 2:05 PM
Suggestion To thank Quote Answer

1/22/2015 6:36 PM	Rate (0)
Deleted User Posts: 767 Rating: (69)	Hello Ahmed, Drive/motorwill not stop as a direct result of this alarm at the 500 hours point. However it is important that action needs to be taken address and remedy the alarm(i.e. replace the fan(s) and reset the operating hours counter for the fan(s)). Best Regards, Deputy
Deleted User Posts: 767 Rating: (69)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_General

Follow us on