Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

After power failure CPU loses connection to CP343-1 Lean

Created by: ClaPet at: 1/22/2008 1:26 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/22/2008 1:26 PM	Rate (0)
ClaPet Posts: 26 Rating: (0)	He has two CPU's each connected to a CP343-1 Lean. The part numbers are as follows: CPU #1: 317-2 PN/DP connecting to the following CPU's (eachCPU hasa CP 343-1CX10-0XE0) over TCP/IP: CPU#2: 6ES7 313-1AD00-0AB0 CPU #3: 6ES7 315-1AF00-0AB0 Everything goes well until there is a power failure, when CPU's #2 and#3lose the configuration of the CP343-1 Lean's. Each time he has todo a Steup again and downloadtheconfiguration. What can be done? Best regards ClaPet
ClaPet Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

1/22/2008 1:42 PM	Rate (0)
Heksu Bronze Member Joined: 12/12/2005 Last visit: 3/17/2024 Posts: 180 Rating: (12)	Hi ClaPet, Ihad samekind of problem one week ago I think. Check this links. /tf/WW/en/Posts/14603 /tf/WW/en/Posts/14714 regards Heksu-
	Last edited by: Heksu at: 22.01.2008 13:44 "Beer is proof that God loves us and wants us to be Happy"-Benjamin Franklin
Suggestion To thank Quote Answer

1/22/2008 2:06 PM	Rate (0)
Hulzhex Gold Member Joined: 8/25/2005 Last visit: 10/5/2024 Posts: 1162 Rating: (111)	Hello ClaPet, I have another idea. Understanding you right, the power failure happend at that CPUs which have the CPs in the rack. Have you checked the buffer battery? Configuration will be lost after a power failure if the buffer battery isn't ok. Best regards Sabine

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on