Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

AI module interfacing problem

Created by: varunkmr72 at: 10/8/2014 6:59 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

10/8/2014 6:59 AM	Rate (0)
varunkmr72 Posts: 2 Rating: (0)	dear all i have a problem when trying to interface analog input and analog output modules with cpu 315-2 pn/dp with my pc/pg. i have actually placed the MODULES (SM-331 AI 812 andSM-332 AI 813) on the rack. But when i put it online mode, it`s unable to respond. i had used module information pop down menu to identify the problem, its shows that the above defined module is configured but not available. i am attach one screen shot of this error message, requesting quick response Attachment problem.JPG (94 Downloads)
varunkmr72 Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

10/8/2014 9:10 AM	Rate (0)
PISCEAN 2010 Diamond Member Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (877)	Could you please provide the MLFB numbers of CPU & AI modules?

Suggestion To thank Quote Answer

10/8/2014 9:38 AM	Rate (0)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 5/3/2024 Posts: 5697 Rating: (715)	Hello, 6ES7331-1KF01-0AB0found in the picture Are all parameters set in hardware config and downloaded? Allso check the black U shaped bus connector. Regards, Marcjan
	Last edited by: Marcjan at: 10/8/2014 9:48 AM Last edited by: Marcjan at: 10/8/2014 9:47 AM Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

10/8/2014 1:54 PM	Rate (0)
varunkmr72 Posts: 2 Rating: (0)	yes, The hardware had been configured and bus connector is connected as per physical inspection. Please let me know how to check weather it is working properly or not ?
varunkmr72 Posts: 2 Rating: (0)	Last edited by: varunkmr72 at: 10/8/2014 1:59 PM
Suggestion To thank Quote Answer

10/31/2014 10:44 AM	Rate (0)
allmächt! Posts: 215 Rating: (6)	Hi, do youhave a second module of this type to check if the module is defect? To check the bus connector you can also parameterize another module if you have one. Regards
allmächt! Posts: 215 Rating: (6)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on