Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Alarm 2120

Created by: ŠΜS at: 1/21/2011 5:49 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

1/21/2011 5:49 PM	Rate (0)
ŠΜS Silver Member Joined: 6/7/2010 Last visit: 2/3/2023 Posts: 569 Rating: (37)	Dear All, In 840D system,2120 NCK Fan alarm type %1 alarm is appearing in the screen. DOCON CD says that ,to check the NCU box fan. I checked the fan, its working fine.Is there any thing more to check it….
	Regards, ŠΜS
Suggestion To thank Quote Answer

1/21/2011 7:13 PM	Rate (0)
Ekalavya Posts: 2964 Rating: (476)	Hello, Could you check the signals fron NC to PLC (DB10) if your using it... >DB10.DBX109.6 =>Air temperature alarm Speed monitoring of the 24 V DC fan used to cool the module has responded. Alarm 2120"NCK fan alarm" is output. When a temperature or fan error responds, a relay contact (terminal 5.1, 5.2 or 5.1, 5.3) in the infeed/regenerative feedback unit is activated Corrective Measures: Replace the fan and/or ensure that additional ventilation is provided. check it out.... Regards, Ekalavya
Ekalavya Posts: 2964 Rating: (476)
Suggestion To thank Quote Answer

1/22/2011 1:20 PM	Rate (0)
ŠΜS Silver Member Joined: 6/7/2010 Last visit: 2/3/2023 Posts: 569 Rating: (37)	Thanks Ekalavya, Proble solved.The problem was in the fan only, some times it doesn’t rotates.
	Regards, ŠΜS
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on