Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

alarm 27023

Created by: sagar_sachin at: 6/1/2009 10:23 AM (3 Replies)

Rating (2)

Thanks 0

4 Entries

6/1/2009 10:23 AM	Rate (0)
sagar_sachin Posts: 7 Rating: (0)	i have a simens 840d isl i got an alarm it states Problems is Grinding Machine SR. No. = 101019 (HG310)- Hansen Drives Ltd, India. 27023 Axis Z1 stop B triggered 27024 Axis Z1 stop A triggered i could find the position difference nck/drive is 300 microns it has a linear scale can i get some check points. please its urgent SAgar
sagar_sachin Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

6/2/2009 8:16 AM	Rate (1)
RAM81 Silver Member Joined: 3/3/2008 Last visit: 10/5/2023 Posts: 333 Rating: (52)	hi sagar, i think your machine is with safety integrated function, these alarms are generated because of the error in the positioning , it is exceeding the tolerance set in the safety machine data's so please check the scale feeback with regards Ram

Suggestion To thank Quote Answer

6/3/2009 12:01 PM	Rate (0)
Gebhardt Karl Platinum Expert Joined: 7/16/2006 Last visit: 1/2/2024 Posts: 1502 Rating: (176)	Hi before the error occurred --> machine had a collision What was previously, I mean before the error occurred
	Karl
Suggestion To thank Quote Answer

6/5/2009 7:34 AM	Rate (1)
Buddoho Posts: 3 Rating: (1)	I will check the encoder or scale feed back cable. good luck
Buddoho Posts: 3 Rating: (1)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on