Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

alarm and trends

Created by: salman92 at: 6/10/2009 11:25 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

6/10/2009 11:25 AM	Rate (0)
salman92 Posts: 17 Rating: (0)	what is the proceduce to give alarm in wincc (digital and analog values) and also trends
salman92 Posts: 17 Rating: (0)
Suggestion To thank Quote Answer

6/10/2009 11:40 AM	Rate (0)
Seemanoj Posts: 2 Rating: (0)	I assume you had created the CFC for the particular alarm. Now Kindly compile the OS by exiting the Wincc Runtime.On compiling the OS alarms tagswill automatically created. Now you have to show the process object on winCc graphic page by copy paste and connecting it with Dynamic WinCC PCS7 Tag. It will create it faceplate on winCc. On opening The faceplate you can set the limits of alarm provided your limit will not exceed from CFC.ByEE
Seemanoj Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

6/10/2009 11:42 AM	Rate (0)
Saravana kumar Gold Member Joined: 2/6/2009 Last visit: 8/19/2024 Posts: 939 Rating: (118)	Hi, Please find the below linkat WinCC Basic Manualat the chapter-9for the configuration of alarms. http://rapidshare.com/files/242920308/GettingStarted_WinCC.pdf.html
	_______________________________________________________________ Best Regards T.Saravana Kumar "All for the Best"
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on