Hello to all, In my alarm control, show all my alarm. In can filter the alarm using the filter inside the control. but this is a little bit complex for operator.

I would like crete a button to force the control to show only a selecterd class. For example i have 3 o more class. Water, Air, ..etc .

when i click one push button, i wold like to see only a Water calss, if i click an other button i would like to see only Air class and so on.

I have read some post, and this apper possible via script using MsgSQLFilter, after a lot of try no result. Always no alarm are showing

Any one may suggest to me the correct sql string for filter by class ?  Any one know a link where i can find a manual or other info ?

Thank you to all in advance

Fabio
 

Hello fabioga66,

which WinCC you're using? (https://support.industry.siemens.com/tf//ww/en/posts/what-do-we-need-to-solve-your-problem/141582/?page=0&pageSize=10)

These discussions might be interesting for you:

https://support.industry.siemens.com/tf//ww/en/posts/how-to-filter-alarm-view/141725?page=0&pageSize=10

https://support.industry.siemens.com/tf//ww/en/posts/group-filter-in-alarm-view/175345?page=0&pageSize=10

Regards,

Nzett11

Opps, i'm sorry, i forgot to specify my system. I use Wincc pro v 15.1.

I have read the previous suggest, but there is'nt an info related to sql string

Thank you

Hello fabioga66,

then you probably found these, aren't you?: 
https://support.industry.siemens.com/cs/ww/en/view/5668269

https://support.industry.siemens.com/cs/ww/en/view/5668269

This posts are the only information, which I found in short time.

Regards,

Nzett11