Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Alarm Control Scroll Bar

Created by: Nene at: 4/24/2008 7:01 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

4/24/2008 7:01 PM	Rate (0)
Nene Posts: 35 Rating: (0)	Hi, I've migrated a project from wincc 6.0 into wincc 6.2. Everything works fine, but in the alarm controls, the scroll bar always starts up at the bottom. I've tried to change it in graphic designer, but it keeps starting on bottom. The wincc project is integrated with step7 project, and if I compile the images, the original alarm controls from the project (journal, hidden, new, ... )have the scroll bars starting on top, as we want. I've noticed that the original pictures have also a picture window (Msg Filter), in witch can be defined the filter to apply and also the position ofboth scroll bars, but I don't know how to make one for my Alarm Controls or if it even needed one in order to have the scroll bar starting on top. Can you help me in this matter?
Nene Posts: 35 Rating: (0)
Suggestion To thank Quote Answer

4/25/2008 5:56 AM	Rate (0)
Phantom75 Posts: 2661 Rating: (278)	Nene: What are your settings in the OS Project Editor: Latest alarm on top or Latest alarm on bottom? Regards
Phantom75 Posts: 2661 Rating: (278)
Suggestion To thank Quote Answer

4/26/2008 1:31 PM	Rate (0)
Khaled_Ezzat Silver Member Joined: 9/7/2007 Last visit: 8/30/2023 Posts: 550 Rating: (61)	can you rebuild the alarms again without migration in the winCCv6.2 and compare the results
	Best Regards
Suggestion To thank Quote Answer

5/6/2008 7:12 PM	Rate (0)
Nene Posts: 35 Rating: (0)	Hi, After checking and re-checking all attributes I've noticed that "MsgCtrlFlags" was set to "MSG_CTRL_SORTORDER_UP - 0", as soon as I changed itto "MSG_CTRL_SORTORDER_DOWN - 1" the scroll bar started on top, was we wanted it to. We've "Last messages on top" selected in project. Thanks
Nene Posts: 35 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on