Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Alarm Control

Created by: Per Olof at: 7/7/2014 10:33 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

7/7/2014 10:33 AM	Rate (0)
Per Olof Posts: 311 Rating: (3)	Hello all, Is it possible to read out: 1) Number of active alarms 2) Number of active alarms that have been acknowledged 3) Number of not active alarms that has not been acknowledged Thanks Per Olof
Per Olof Posts: 311 Rating: (3)
Suggestion To thank Quote Answer

7/8/2014 8:57 AM	Rate (0)
Per Olof Posts: 311 Rating: (3)	Please help
Per Olof Posts: 311 Rating: (3)
Suggestion To thank Quote Answer

7/8/2014 12:24 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/17/2025 Posts: 4394 Rating: (1463)	Hi Are you talking about WinCC Professional or Adavanced?
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

7/8/2014 2:27 PM	Rate (0)
Per Olof Posts: 311 Rating: (3)	WinCC Professional V12
Per Olof Posts: 311 Rating: (3)
Suggestion To thank Quote Answer

7/8/2014 3:08 PM	Rate (0)
Denilson Pegaia Platinum Expert Joined: 9/23/2005 Last visit: 1/17/2025 Posts: 4394 Rating: (1463)	Hi, that I know there is no direct way to do it, I suggest you trya workarround: set the Alarm annunciator of the alarms, and in Alarm Groups set tags for status / acknoledgment. By change value scripting of these tags, you can get indirectlythe status ifthere is alarms actives or not.
	Denilson Pegaia Siemens Industry Sector Technical Support
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Prof Alarms Messages

Follow us on