Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

alarm inhibiting problem

Created by: marinb126 at: 12/13/2007 10:28 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/13/2007 10:28 AM	Rate (0)
marinb126 Posts: 26 Rating: (0)	i have a question. i did "block related messages" procedure to show alarms in Alarm Logging. now when i want to block one alarm, AlarmLogging blocks the whole byte (including 7 other messages in the same byte as the one i wanted to block). Is there any way to block only one message?
marinb126 Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

12/13/2007 1:24 PM	Rate (0)
rit03 Silver Member Joined: 6/13/2006 Last visit: 2/11/2023 Posts: 341 Rating: (24)	May be it can be done by filtering Alarm logging with message number but I 'm not sure. Give a try.

Suggestion To thank Quote Answer

12/13/2007 1:26 PM	Rate (0)
marinb126 Posts: 26 Rating: (0)	nope, i already tried.it still blocks the whole byte.
marinb126 Posts: 26 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on