Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

ALARM log problem

Created by: PISCEAN 2010 at: 6/1/2011 7:12 AM (19 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

20 Entries

Entries per page: 10 | all

6/1/2011 11:14 AM	Rate (0)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (878)	I will check the same & revert back to you..

Suggestion To thank Quote Answer

6/1/2011 12:18 PM	Rate (0)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (878)	Hello Makaveli, I followed the steps suggested by you. When I followed step2 i.e. “store log” nothing happens, screen remains as it is. Also when I press the key “ALARM LOG” no any list is displayed on the screen.

Suggestion To thank Quote Answer

6/1/2011 6:44 PM	Rate (0)
makaveli Posts: 259 Rating: (5)	So nothing is saved and showed in Alarm log???? Strange you are 100% sure that this alarm what you see on the screen it isn't only message or communicate? If you could please put some print screen here or at least alarms numbers that appear on the screen. With regards, makaveli
makaveli Posts: 259 Rating: (5)
Suggestion To thank Quote Answer

6/2/2011 6:32 AM	Rate (0)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (878)	Hello Makaveli, Tool declamped. In alarm & message window following alarm/message is displayed 700054 Tool declamps. 21612 Channel 1 Axis S1/SP enable reset. Again tool clamped. Reset key pressed. This alarm & message got clear. But this did not got register in ALARM LOG.

Suggestion To thank Quote Answer

6/2/2011 8:11 AM	Rate (0)
makaveli Posts: 259 Rating: (5)	hm... This are alarms so the should be in alarm log. I don't have ideas. Try switch on and off PCU maybe there are some error there. With regards, makaveli
makaveli Posts: 259 Rating: (5)
Suggestion To thank Quote Answer

6/2/2011 8:57 AM	Rate (0)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (878)	Yes sir. I tried at least 3-4 times. But problem persist. This is one example. Like this user is not able to check/see, alarm/message history in ALARM log as it is not getting register.

Suggestion To thank Quote Answer

6/3/2011 5:47 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello Deep, I have question to you....have you enabled logging on in action log screen > you can find it in HMI screen....there you can see file size of logsee what is the size there and ensureall the recorded data's are selected..... All settings of action log are stored in file user\actlog.ini Checkit out..... Regards, Ekalavya
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

6/3/2011 7:09 AM	Rate (0)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (878)	Hello Ekalavya, Could please explain me how to check it in stepwise? Thanks & regards,

Suggestion To thank Quote Answer

6/3/2011 7:49 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	Hello Deep, Informations are there in Action LOG attachment which is posted earlier....could check that? Regards, Ekalavya
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

6/7/2011 1:42 PM	Rate (0)
PISCEAN 2010 Diamond Expert Joined: 4/23/2010 Last visit: 12/31/2023 Posts: 8092 Rating: (878)	Hello Ekalavya, I checked the ALARM LOG file attachement & confirmed the settings. But still problem persist. What needs to be done?

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on