Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Alarm Logging Response Time

Created by: henno2000 at: 4/23/2007 4:39 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

4/23/2007 4:39 PM	Rate (0)
henno2000 Posts: 177 Rating: (0)	Hi, I have been experiencing some 'nuisance' trpping on site, but the equipment that is causing the tripping is not flagging up on the alarms screen. I have checked and verified the integrity of the alarm which appears to be OK, which leads me to think that if the signal was broken for a small amount of time (microseconds), would this still display on the alarms page? If not, what is the response time taken for the message to display? Regards, henno2000
henno2000 Posts: 177 Rating: (0)
Suggestion To thank Quote Answer

4/23/2007 4:46 PM	Rate (0)
Ikkezelf Posts: 1084 Rating: (72)	The alarm logging polls every 500 ms. Therefore any signal shorter then 500 ms could be lost. with regards, Ikkezelf
Ikkezelf Posts: 1084 Rating: (72)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on