Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Alarm tags

Created by: rs-data at: 2/27/2007 2:42 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

2/27/2007 2:42 PM	Rate (0)
rs-data Regular Member Joined: 1/28/2006 Last visit: 10/29/2022 Posts: 7 Rating: (0)	I have a small question but a big problem We have made a list of alarm tags about 250 all byte's of the same db But now we can read all tag until 231 all abouve 231 they wont work is there a limitation in the amount of db data ? if we change all abouve 231 to a new db they work but in the same db not is there a solution thanks in advance rudi

Suggestion To thank Quote Answer

2/27/2007 3:12 PM	Rate (0)
Nemo Posts: 3149 Rating: (171)	Hi perhaps this FAQ can help? http://support.automation.siemens.com/WW/view/en/10570879 nemo
Nemo Posts: 3149 Rating: (171)
Suggestion To thank Quote Answer

2/28/2007 12:53 PM	Rate (0)
rs-data Regular Member Joined: 1/28/2006 Last visit: 10/29/2022 Posts: 7 Rating: (0)	Hello nemo I removed all the thags and entered them again with the same name and the problem was still there than i declaired them again manual in the allarm screen and the problem was gone thisfor further information regards rudi

Suggestion To thank Quote Answer

2/28/2007 3:09 PM	Rate (0)
Ates Posts: 198 Rating: (17)	Alarm Logging: Pain in the ass, I dont know who wrote it , but i bet he was part time worker at siemens and he wasnt talking same language with writer of text library .. anyone who played with alarm looging should understand my reproach..
Ates Posts: 198 Rating: (17)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on