Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

An other screen by an PLC input

Created by: Toeternietoe at: 9/24/2014 3:42 PM (2 Replies)

Rating (0)

Thanks 1

3 Entries

9/24/2014 3:42 PM	Rate (0)
Toeternietoe Platinum Member Joined: 12/27/2006 Last visit: 11/29/2024 Posts: 1197 Rating: (113)	I have an HMI screen (KPT400) coupled to a LOGO! That work super. But now I want a particular screen opens when I make an active input (or output), and the previous screen is opened again when the same input (or output) is inactive. so I1 OFF Screen0 I1 ON goto Screen1 I1 OFF : goto Sreen0 How do I do that? I have already found how to make a screen active when an input change. but that just works a little different In the HMI Tags screen and then on the events of the input I1 can I call a screen like this input changed, but that does not return to the previous screen. (WinCC TIA portal Versie 12
	Last edited by: Toeternietoe at: 9/24/2014 3:43 PM
Suggestion To thank Quote Answer

9/29/2014 7:30 AM	Rate (0)
K!ke Posts: 1299 Rating: (136)	Hello, do you use a KTP400 Comfort or KTP400 Basic? K!ke
K!ke Posts: 1299 Rating: (136)
Suggestion To thank Quote Answer

10/7/2014 8:18 AM	Rate (0)
Toeternietoe Platinum Member Joined: 12/27/2006 Last visit: 11/29/2024 Posts: 1197 Rating: (113)	KTP basic Color PN

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users elner

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Adv Picture Controls

Follow us on