Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Analog Alarm Configuration WinCC

Created by: Rahul Singhal at: 5/16/2008 8:30 AM (1 Replies)

Rating (0)

Thanks 1

2 Entries

5/16/2008 8:30 AM	Rate (0)
Rahul Singhal Posts: 3 Rating: (0)	Hi All,I am working in WinCC 6.2.I have to configure Analog Alarms depending on a value (not using bits) in a word tag.I am getting values ranging from 0 to 400 in a word tag (MW100).Depending on each value I have to configure an alarm.Can you please help me how to configure these Alarms.Thanks & RegardsRahul Singhal
Rahul Singhal Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

5/16/2008 2:36 PM	Rate (0)
billwest Posts: 510 Rating: (119)	http://support.automation.siemens.com/US/view/en/17356933 The link is for the WinCC V6.2 Getting Started Manual. Section 4.5 has a description on setting up Analog Alarms. Bill
billwest Posts: 510 Rating: (119)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users yeux

|

Share this page:

Share this page on...

Follow us on