Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

analog configure

Created by: ALGUDKAR RAO at: 1/10/2013 12:10 PM (4 Replies)

Rating (1)

Thanks 2

5 Entries

1/10/2013 12:10 PM	Rate (0)
ALGUDKAR RAO Posts: 621 Rating: (10)	Hi all how to connect sensors analog module with channel wiseand hardwiring withexample where can i find please give me the link adress related to analog.
ALGUDKAR RAO Posts: 621 Rating: (10)
Suggestion To thank Quote Answer

1/10/2013 12:18 PM	Rate (0)
Darius Platinum Expert Joined: 9/28/2005 Last visit: 8/27/2024 Posts: 2957 Rating: (242)	Hi, As long as you didn't provide enough information then I suggest you to read this manual:SIMATIC S7-300 S7-300 Automation System Module Data Find the analog module you use and you will find schematics of how to correctly wire particular module.
	Best regards, Darius
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users dchartier

1/10/2013 12:22 PM	Rate (0)
dchartier Grandmaster-Expert Joined: 9/27/2006 Last visit: 9/14/2024 Posts: 12282 Rating: (2683)	Hello algudkar; To a very general question we can only provide very general answers. The following manual contains a chapter on standard S7-300 analog modules, with specifications and wiring diagrams for each: SIMATIC S7-300 S7-300 Automation System Module Data Now if this is not sufficient, please give us a description of your application and the part number of the module you want to use. Hope this helps, Daniel Chartier

Suggestion To thank Quote Answer

1/10/2013 12:23 PM	Rate (0)
ALGUDKAR RAO Posts: 621 Rating: (10)	HI darius thank you for your prompt reply i have this manual and i was followed this but some one asked me easy method configure analog related eg wekipedia website like that.
ALGUDKAR RAO Posts: 621 Rating: (10)
Suggestion To thank Quote Answer

1/10/2013 12:38 PM	Rate (1)
dchartier Grandmaster-Expert Joined: 9/27/2006 Last visit: 9/14/2024 Posts: 12282 Rating: (2683)	Hello algudkar; I do not believe you will find much useful information on a general encyclopedia for such matters. Each manufacturer deals with its input sgnals differently, andthey have implemented various technologies in particular modules they design. If you examine the different schematics for analog modules in the manual recommended by Darius and myself, you will see that each module is different. And the way the signal is digitally encoded to the PLC is different for every manufacturer as well (see chapter 5, "Analog signal representation" of the same manual. So use Siemens' manuals for Siemens analog modules, Rockwell manuals for Controllogix analog modules, Mitsubishi... Hope this helps, Daniel Chartier

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users hdhosseini

|

Share this page:

Share this page on...

Follow us on