Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

analog input (4-20mA) erratic

Created by: valski at: 10/23/2013 3:17 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

10/23/2013 3:17 AM	Rate (0)
valski Posts: 15 Rating: (0)	Dear all, I've got an outputsignal from a speed transducer (4-20mA) fed to 6ES7334-0CE01-0AA0, analog input/ouput module. my problem is when i monitor the signal is somewhat erratice not stable, it swings from hi to low,despite using a shielded cable for the signal input, thus the control is problematic Any help/recommendation is very much appreciated. valski
valski Posts: 15 Rating: (0)
Suggestion To thank Quote Answer

10/23/2013 6:20 AM	Rate (0)
@shish Bronze Member Joined: 9/16/2011 Last visit: 6/20/2024 Posts: 291 Rating: (6)	valski Dear all, I've got an outputsignal from a speed transducer (4-20mA) fed to 6ES7334-0CE01-0AA0, analog input/ouput module. my problem is when i monitor the signal is somewhat erratice not stable, it swings from hi to low,despite using a shielded cable for the signal input, thus the control is problematic Any help/recommendation is very much appreciated. valski Hello, Did you connect the Analog input correctly? Check the attachment for wiring. Did you try to change the input to another channel of same module? Reg, @shish Attachment WIRING.pdf (293 Downloads)
	Reg, @shish --- If satisfied with reply, Rate it ! If problem solved, hit THANK !
Suggestion To thank Quote Answer

10/23/2013 7:20 AM	Rate (0)
Nelliyan randy Posts: 461 Rating: (29)	After Checking ur wiring ,, still there s a problem.. First check ur Amps in the Channel using a Clamp Meter( If there s fluctuation there itself there s no problem regarding Scaling) . If no problem there then u have to take a look at your Scaling Part,, Also check the address u assigned for AI ,, AIW or AID ( AID is preferable) Posting a screen shot may help u for getting a sooner answer.. Regards, Nelliyan.G
Nelliyan randy Posts: 461 Rating: (29)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users metwally mustafa

|

Share this page:

Share this page on...

Follow us on