Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Analog Input 6ES7331-1KF02-0AB0 Pt100 resolution problem

Created by: Winchester7 at: 8/1/2013 9:17 AM (4 Replies)

Rating (0)

Thanks 3

5 Entries

8/1/2013 9:17 AM	Rate (0)
Winchester7 Experienced Member Joined: 7/19/2013 Last visit: 5/15/2024 Posts: 68 Rating: (3)	Helloo... I'm facing problem with Analog Input 6ES7331-1KF02-0AB0.. The problem is the value I got is very fluctuating / not stable when I connected a Pt100 sensor How can I reduce the resolution of this analog input or filter it, so I can get a smoother reading? Thank you

Suggestion To thank Quote Answer

8/1/2013 9:39 AM	Rate (0)
H-H Platinum Member Joined: 7/2/2008 Last visit: 9/30/2024 Posts: 928 Rating: (308)	Hellowinarko_song, I strongly recommend to check connection, cable shield and earthing. If you fail to get a stable reading after checking these three things, you can use a software solution. Please check these links Fluctuating Analogue Reading on HMI Input a filter on the analog input to reduce instability Advanced - adaptive smoothing filter software low-pass filter in STEP 7 V5.x Best regards. H-H
	Last edited by: H-H at: 8/1/2013 9:39 AM
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Marcjan Ste39

8/14/2013 8:45 AM	Rate (0)
Winchester7 Experienced Member Joined: 7/19/2013 Last visit: 5/15/2024 Posts: 68 Rating: (3)	Thanks H-H, The software is working like a magic

Suggestion To thank Quote Answer

8/14/2013 9:12 AM	Rate (0)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 5/3/2024 Posts: 5697 Rating: (715)	H-H Hellowinarko_song, I strongly recommend to check connection, cable shield and earthing. Software might work for you, but it's hiding the problem. Problems you might run into again in the future, so i suggest you try to find the reason for this abnormal fluctuation of your PT100 reading. Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

8/14/2013 12:47 PM	Rate (0)
Winchester7 Experienced Member Joined: 7/19/2013 Last visit: 5/15/2024 Posts: 68 Rating: (3)	Hi Marcjan, I've checked all the connection,cable,and grounding, but it was still fluctuating before. So, I decide to use the software as my final solution. Thank you for your suggestion and support.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users S_Moderator

|

Share this page:

Share this page on...

Follow us on