Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

analog input processing

Created by: stewpid1 at: 2/8/2017 3:26 PM (2 Replies)

Rating (0)

Thanks 3

3 Entries

2/8/2017 3:26 PM	Rate (0)
stewpid1 Experienced Member Joined: 10/15/2014 Last visit: 10/29/2023 Posts: 80 Rating: (2)	If I have a 0-10v analog input and I want to only use the range between 4-7volts to give linear analog output of 0-10v and where any input value below 4 volts outputs 0 volts and any input value above 7 volts outputs 10 volts is it easy to do?

Suggestion To thank Quote Answer

2/8/2017 3:41 PM	Rate (0)
ixo65 Grandmaster-Expert Joined: 12/18/2014 Last visit: 12/11/2023 Posts: 31602 Rating: (3930)	Here's a possible solution. Attachment Min400_Max700_0BA8.Standard.zip (77 Downloads)

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users stewpid1 nguyenquockhoa

2/8/2017 3:55 PM	Rate (0)
stewpid1 Experienced Member Joined: 10/15/2014 Last visit: 10/29/2023 Posts: 80 Rating: (2)	that's great. thank you, you have been really helpful yet again.

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ixo65

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on