Analog input selection for different voltage signals

Created by: hdhosseini at: 4/13/2010 6:14 PM (1 Replies)

4/13/2010 6:14 PM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 3/29/2025 Posts: 6867 Rating: (1367)	Hi Is there any analog card for siemens to support these odd analog signals or I shouls use signal conditioner? 0-0.5 V AC 0-30 V DC 0-6 V DC 0-20 V DC -3.5 to +2.5 V DC 0-130 V DC +-60 mv Thanks in advance.hdhosseini
	Demo Channel on Youtube
Suggestion To thank Quote Answer

4/19/2010 12:47 AM	Rate (0)
H-H Platinum Member Joined: 7/2/2008 Last visit: 3/19/2025 Posts: 928 Rating: (309)	Dear hdhosseini, Siemens produces analog input modules for various analog measurements. If you visit A&D mall, you will see that the following analog measurementscan be read by different modules, 0 to +10 V 1 to 5 V 1 to 10 V -1 V to +1 V -10 V to +10 V -2.5 V to +2.5 V -250 mV to +250 mV -5 V to +5 V -50 mV to +50 mV -500 mV to +500 mV -80 mV to +80 mV You can see that some of your analog signals that you have asked about are not covered by Siemens and I assume that they are not even covered by any automation vendor profile. For these analog measurements, you will need signal conditioners and voltage transducers. I hope you can find what you are looking for in PHOENIX CONTACTand in LUMEL(Maybe you can find some other suppliers but these are the ones that I know). Best regards. H-H

Suggestion To thank Quote Answer