Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Analog IO module

Created by: samsam46 at: 3/15/2014 10:17 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

3/15/2014 10:17 PM	Rate (0)
samsam46 Posts: 17 Rating: (0)	Dear Sir , I am using Analog Module 6ES7 234 4HE 30 - OXBO , in the ladder programme i have use NORM_X and SCALE_X , and Im trying to Simulate i use Min value as 5529 and Max Value 27648 in NORM_X , but when im trying to Inject not even inject but place the probes of Injector (4-20mA) multimeter on the Probes the value range is showing maximum without any injecting the value as 4mA even i didnt inject the value goes high reaching maximum , even i selected 0-20mA during configuration. I selected channe 2 and 3 showing the same , what could be the reason. Thanks Sam
samsam46 Posts: 17 Rating: (0)
Suggestion To thank

3/15/2014 10:58 PM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 1/17/2025 Posts: 4114 Rating: (195)	closed cause question posted twice. The second thread with the subject Analog IO moduleis published within the same conference. Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Follow us on