Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Analog Module

Created by: Rahul Sayre at: 4/6/2011 9:17 AM (4 Replies)

Rating (1)

Thanks 0

5 Entries

4/6/2011 9:17 AM	Rate (0)
Rahul Sayre Experienced Member Joined: 2/24/2009 Last visit: 9/30/2023 Posts: 116 Rating: (2)	Dear All, I am having s7 300 analog input module with 13 bit resolution. I have found that for 4-20 ma / for 20 ma I am getting count 27648. Can anybody tell me how it is 27648??? regards, Rahul

Suggestion To thank Quote Answer

4/6/2011 9:34 AM	Rate (1)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 7/12/2023 Posts: 10221 Rating: (1177)	Hello, There How 27648 Analaog Maximum Value ? Best regards, Hristo Mihalev

Suggestion To thank Quote Answer

4/6/2011 9:46 AM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 9/29/2023 Posts: 8593 Rating: (1132)	Hello, Here is a link to manual: SIMATIC S7-300 S7-300 Module data See chapter 5, And chapter 6, see input module and how to connect. Best regards, Wizard

Suggestion To thank Quote Answer

4/8/2011 6:13 AM	Rate (0)
Rahul Sayre Experienced Member Joined: 2/24/2009 Last visit: 9/30/2023 Posts: 116 Rating: (2)	Dear Expert, If 27648 is designed for s7 300 PLC analog module then why same thing is not followed for s7 200 Module??????? Regards, Rahul

Suggestion To thank Quote Answer

4/8/2011 9:35 AM	Rate (0)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (708)	The S7-200 was disigned by TI, Siemens took over the concept, that could be the reason. Best regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on