Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Analog output card supply error

Created by: opilopilo at: 9/2/2014 2:25 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

9/2/2014 2:25 PM	Rate (0)
opilopilo Posts: 11 Rating: (0)	Hi I have got 3 analog output cards (6ES7 332-5HF00-0AB0). Two of them are in one rack with a ET200 and the other in another rack with another ET200. All of the analog cards give me the same error. When I go to see in online de diagnose of these cards, the error for the three is the same: - Extern error - Lack of external auxiliari voltage(Falta tension auxiliar de tension) - Defective module I have check the pins of the supply of those cards(1 and 20) and in all of them there is 24 Volts, so cards have voltage. I think that the problem can be that there is a short-circuit in one of the output channels, but I am not sure.
opilopilo Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

9/2/2014 2:48 PM	Rate (0)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 5/3/2024 Posts: 5697 Rating: (715)	Hello, How are the cards setup and wired, Voltage or current? Does the setup corresponds with your wiring? Diagnostics set to on with empty channels? Using 2 wire voltage and forgot the bridges to S4+ and S4- ? Regards, Marcjan
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

9/3/2014 10:47 AM	Rate (0)
opilopilo Posts: 11 Rating: (0)	I have seen where the error was. The external supply wasn´t correctly conected, so the card couldn´t receive this supply Thanks
opilopilo Posts: 11 Rating: (0)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Marcjan

9/4/2014 4:02 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4767 Rating: (123)	New question published by amermesbahiis split to a separate thread with the subject Soft Starter - connection between terminal and a analogic card. Best Regards Min_Moderator

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on