Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Analog Scaling of 6ES7 334-0CE01-0AA0

Created by: Soft-tech at: 3/2/2009 6:43 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

3/2/2009 6:43 AM	Rate (0)
Soft-tech Posts: 2 Rating: (0)	Attepted to use FC105 (SCALE) but it refuses to accept PIW input I guess because the module is 8bit? not sure any idea how to get do this?
Soft-tech Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

3/2/2009 8:49 AM	Rate (0)
H-H Platinum Member Joined: 7/2/2008 Last visit: 3/14/2023 Posts: 928 Rating: (303)	Are you sure you have declared the PIW in the symbol table as an Integer not word?

Suggestion To thank Quote Answer

3/2/2009 10:18 AM	Rate (0)
Soft-tech Posts: 2 Rating: (0)	H-H Are you sure you have declared the PIW in the symbol table as an Integer not word? HI H-H, Many thanks. I have declared it as int however it still does not accept it. But what I've found was if i delete the symbol it works ok and stop working if i add a symbol. and makes no difference if i declare it as WORD or INT. it only accepts PIW with no symbol?
Soft-tech Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on