Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

animation

Created by: Sulung at: 12/15/2007 3:31 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

12/15/2007 3:31 AM	Rate (0)
Sulung Bronze Member Joined: 5/26/2007 Last visit: 12/1/2023 Posts: 126 Rating: (3)	Hi, I am new with WinCC, my question is could i do a animation with WinCC? Suppose i would like to display a rotating fan or conveyor, how do i do it? please help me. thank you

Suggestion To thank Quote Answer

12/15/2007 6:15 AM	Rate (0)
dchartier Grandmaster-Expert Joined: 9/27/2006 Last visit: 12/1/2023 Posts: 12183 Rating: (2636)	Hello aulung; I made a suggestion earlier to someone asking a similar question, maybe you could look at the post: /tf/WW/en/Posts/13788 Hope this helps, Daniel Chartier

Suggestion To thank Quote Answer

12/18/2007 2:17 PM	Rate (0)
Danielle Posts: 1275 Rating: (123)	Hi, If you want a more simple animation, with the status display you can blink between two bitmaps. For a ventilator, for instance, you could have 2 bitmaps, with th blades in different positions... maybe just blinking between the 2 bitmaps will do the trick! Best regards, Danielle
Danielle Posts: 1275 Rating: (123)
Suggestion To thank Quote Answer

12/19/2007 2:30 PM	Rate (0)
HNSW52 Posts: 3 Rating: (0)	just try the method shown in WinCC Demo: dynamicdialog running in a closed loop as a counter (see zip-file containing screenshots). Have fun!! Attachment WinCC_Animation.zip (177 Downloads)
HNSW52 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

4/13/2008 3:20 PM	Rate (0)
heguli Posts: 16 Rating: (1)	I was able to make animation. See attachment Attachment animatedblowerie5.jpg (85 Downloads)
heguli Posts: 16 Rating: (1)	Last edited by: O_Moderator at: 8/25/2011 1:14 PM picture transferred to attachment
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on