Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

AOP30 NOT WORKING and download fault

Created by: madatix at: 1/16/2016 5:58 PM (1 Replies)

Rating (0)

Thanks 1

2 Entries

1/16/2016 5:58 PM	Rate (0)
madatix Posts: 15 Rating: (0)	HELLO im new with SINAMICS drives we have a g130 unit ...the AOP30 doesn't display anything and the fault led is on i logged to the controller through ETHERNET ..and i entered the data offline then went online and tried to download the project to the system but there was an error Fault: 01.01.70 09:25:31:988 G130_CU320_2_DP : Drive_1 -- 1042 : Parameter error during project download(Parameter: 346, Index: 0, fault cause: 200) Fault: 01.01.70 09:24:26:620 G130_CU320_2_DP : Drive_1 -- 7860 : External fault 1 Fault: 01.01.70 09:24:25:532 G130_CU320_2_DP : Drive_1 -- 1043 : Fatal error at project download(Fault cause: 14) Warning: 01.01.70 09:24:26:620 G130_CU320_2_DP : Drive_1 -- 7850 : External alarm 1 Warning: 01.01.70 09:24:26:620 G130_CU320_2_DP : Drive_1 -- 7991 : Drive: Motor data identification activated could anyone help ??!!
madatix Posts: 15 Rating: (0)
Suggestion To thank

1/18/2016 9:26 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	Closed cause question posted twice. The second thread with the subject AOP30 NOT WORKING and download fault is published within the conference SINAMICS. Best regards Min_Moderator

Suggestion To thank
This contribution was helpful to 1 thankful Users madatix

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_G

Follow us on